How to Remove Small Stripped Screws Without a Drill?

How to Remove Small Stripped Screws Without a Drill?

Stripped screws can cause you a lot of trouble, especially when you don’t have access to a drill. However, it is possible to get rid of them by following a number of techniques. The following techniques will enable you to get this done without damaging the surrounding material!

Use a Rubber Band

Use Rubber Band to Unscrew the stripped screw
Image Credit: ThisOldHouse
  • One of the easiest methods to remove stripped screws is by using a rubber band. Simply place the rubber band over the screw and press down firmly with your screwdriver. The rubber band will provide extra grip and help turn the screw.

Try a Manual Impact Driver

Try a Manual Impact Driver to unscrew a sritpped screw
Image Source: Tool Ever
  • A manual impact driver is a tool specifically designed to remove stripped screws without using a drill. You can find them at most hardware stores. Place the impact driver over the stripped screw and twist it counterclockwise to remove the screw.

Use Pliers

use pliers to unscrew a stripped screw
Image Source: The Spruce
  • If the stripped screw is protruding from the surface, you can use pliers to remove it. Simply grip the screw head with the pliers and turn it counterclockwise.

Apply Heat

  • If the stripped screw is stuck due to rust or corrosion, applying heat can help break the bond. Use a small torch or heat gun to heat up the surrounding area for a few seconds. Be careful not to overheat the material or cause damage.

But is it totally free from hazards? Well, not really? You need to be careful about certain things.

Here are some common challenges you may encounter:

  1. Limited access: If the broken drill bit is located in a tight or hard-to-reach space, it can be challenging to get the necessary leverage and tools to remove it.
  2. Fragility: The broken SDS drill bit can be fragile and prone to breaking or further damage if too much force is applied during removal.
  3. Damage to surrounding components: During the removal process, it’s important to be careful not to damage surrounding components, such as the chuck or motor housing.
  4. Difficulty gripping: Depending on how much of the drill bit is broken off, it may be difficult to grip and remove with pliers or other tools.
  5. Risk of injury: Removing a broken SDS drill bit can produce metal shavings and debris, which can be hazardous if they get in your eyes or skin. It’s important to wear appropriate safety gear, such as safety glasses and gloves, to protect yourself.

Conclusion:

Now are you confident about removing stripped screws without a drill? Surely you are not feeling frustrated anymore. So, just try out one of the aforementioned methods and relieve yourself from distress, but please do not overheat the material or cause damage!!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top