How to Remove a Screw With no Head from Metal? 6 Steps!

How to Remove a Screw With no Head from Metal? 6 Steps!

Are you wondering how to remove a screw with no head from metal? Do you think it is a daunting task? Well, it is not really so difficult! If you have the right tools and techniques, you will be able to get rid of a head-less screw with ease. Now it is time for you to learn the techniques and protect yourself from the frustration of having to deal with a stripped or broken screw. This article will guide you through the steps that you need to follow to accomplish this task.
Materials Needed:
● Pliers or locking pliers
● Screw extractor set
● Hammer
● Drill
● Lubricant

Step 1: Assess the Screw

Assess the Screw

Before attempting to remove the screw, you should assess the situation to determine the best course of action. If the screw is broken off flush with the metal, you will need to use a different method than if the screw is slightly raised or has some of the threading exposed.

Step 2: Apply Lubricant

If the screw is rusty or stuck, you may need to apply lubricant to help loosen it up. You can use a penetrating oil or even a little bit of WD-40. Apply the lubricant to the screw and let it sit for a few minutes.

Step 3: Grab the Screw with Pliers

Using pliers or locking pliers, try to grab onto the exposed threading of the screw. Gently twist the pliers back and forth to see if you can loosen the screw. If this does not work, move on to the next step.

Step 4: Use a Screw Extractor

A screw extractor is a tool specifically designed to remove stripped screws. Insert the extractor into the drill and carefully drill into the center of the screw. Once the extractor has been drilled in, you can use it to turn the screw out. Be sure to turn the extractor counterclockwise to loosen the screw.

Step 5: Drill a Hole

If you cannot get a grip on the screw or the extractor does not work, you may need to drill a hole into the screw. Using a drill bit slightly smaller than the screw, carefully drill into the center of the screw. Then, use a larger drill bit to create a hole that is slightly larger than the screw.

Step 6: Remove the Screw

Remove the Screw

After drilling a hole, you should be able to easily remove the screw with pliers or locking pliers.

Or check this video tutorial:


So, now you must have realized that removing a screw with no head from metal is not really so hard! You just need to have the right tools and follow the aforementioned steps! Yes! Now just try out the formula and save yourself from unwanted hassle!!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top